Tame-Power introduces non-isolated liquid-cooled DC-DC converters for Battery System Applications. These DC-DC converters allow to transfer up to 120 kW.
Key specifications
Non-Isolated Liquid-Cooled simple unit DC-DC converters are able to:
- Operate on 35 V to 950 V voltage ranges
- Generate an output power of up to 120 kW
- Integrate into both stationary and embedded applications
- Transfer power in both boost and buck mode (bidirectional DC to DC converters)
- Integrate several control modes in the input or in the output: current, voltage, and power
- Integrate a specific mode to battery charge
- Combine several DC-DC converters to increase the total output power
Product lineup
Power
Tame-power DC-DC converters CONVY L S range allow to transfer up to 120 kW. The optimal distributed power level depends on system parameters and on voltage input and output ranges. Tame-Power proposes individual support to ensure the perfect match between Tame-Power products, your specific needs, and applications.
Voltage
Tame-Power non-isolated liquid-cooled simple unit DC-DC converters are predisposed to operate on voltage ranges from 35 V to 950 V in input or in output.
Cooling
Tame-Power CONVY L S DC-DC converters use liquid cooling:
- Liquid coolant: 50% glycoled water
- Flow rate: minimum: 3 L/min., typ. : 5 L/min., maximum : 7 L/min.
- Pressure: maximum: 5 bar
- Inlet liquid temperature: minimum: -20°C, maximum: +65°C.
Regulation modes
Tame-Power non-isolated liquid-cooled simple unit DC-DC converters are easy to execute and are managed by CAN messaging. Tame-Power products integrate several control modes, in input or output: current, voltage, and power.
Tame-Power non-isolated liquid-cooled simple unit DC-DC converters beneficiate from embedded intelligence allowing to optimize of the output power on each operating point.
Click here to learn more about CONVY-DCDC-800V-07-RA-00
