Tame-Power has recently launched single and double-size non-isolated liquid-cooled DC-DC converters that allow to transfer up to 120 kW. Available in their initial setup, non-isolated liquid-cooled simple unit DC-DC converters allow the adjustment of their parameters to adapt to the environment and constraints.

Key features

• Operate on 35 V to 950 V voltage ranges
• Generate an output power of up to 120 kW
• Integrate into both stationary and embedded applications
• Transfer power in both boost and buck mode (bidirectional DC to DC converters)
• Integrate several control modes in input or output: current, voltage and power
• Integrate a specific mode to battery charge
• Combine several DC-DC converters to increase the total output power

Power

Tame-power DC-DC converters CONVY L S range allow to transfer up to 120 kW. The optimal distributed power level depends on system parameters and on voltage input and output ranges. Tame-Power proposes individual support to ensure the perfect match between Tame-Power products, your specific needs and applications.

Voltage: Tame-Power non-isolated liquid-cooled simple unit DC-DC converters are predisposed to operate on voltage ranges from 35 V to 950 V in input or in output.

Cooling

• Tame-Power CONVY L S DC-DC converters use liquid cooling:
• Liquid coolant: 50% glycoled water
• Flow rate: minimum: 3 L/min., typ. : 5 L/min., maximum : 7 L/min.
• Pressure: Maximum: 5 bar
• Inlet liquid temperature: minimum: -20°C, maximum: +65°C.

Regulation modes: Tame-Power non-isolated liquid-cooled simple unit DC-DC converters are easy to execute and are managed by CAN messaging. Tame-Power products integrate several control modes, in input or output: current, voltage, and power.

Tame-Power non-isolated liquid-cooled simple unit DC-DC converters benefit from embedded intelligence allowing them to optimize the output power on each operating point.

Mechanics: Non-isolated liquid-cooled simple unit DC-DC converters weigh 11 kg per unit.

Starter Kit: Tame-Power developed the Starter Kit which aims to facilitate non-isolated liquid-cooled simple unit DC-DC converters start up and power up. The Starter Kit aims to expedite Tame-Power DC-DC converters power up thanks to its dedicated content: Tame-Power HMI, CAN communication probe, PEAK CAN driver software, communication, and power cables.

Customization: For specific needs, Tame-Power proposed to adjust its catalog references to make available products:

• Meeting specific needs based on Tame-Power catalog products
• Allows to optimize time requirements at controlled costs
• Permitting to propose a product that is specifically adjusted to your application environment

DC-DC Converters Racks: Tame-Power DC-DC converters can be assembled to increase the total output power. Hence, Tame-Power proposes to associate up to 10 power conversion modules per system, allowing it to reach output power in the order of megawatts.

Key applications

• Fuel cell power
• Battery systems
• Chargers
• Solar panels
• Supercapacitors