Diodes Incorporated Introduces Two Data Lane ReDriver for IoT Applications

Diodes Incorporated Introduces Two Data Lane ReDriver for IoT Applications

Diodes Incorporated, a leading global manufacturer and supplier of semiconductor devices, has recently released a low-power, high-performance MIPI D-PHY 1.2-compliant signal ReDriver. The PI2MEQX2503 regenerates signals transmitted at data rates up to 2.5Gbps from cameras to displays in various applications, including laptops, tablets, mobile phones, Internet-of-Things (IoT) devices, commercial displays, augmented reality headsets, drones, and robots.

Featuring a dual-data-lane equalizer and a single clock lane, the PI2MEQX2503 compensates for PCB, connector, cable, and switching-related losses. This ReDriver enables optimum electrical performance from a CSI2 source to a DSI sink. It operates at up to 2.5Gbps to comply with the MIPI D-PHY 1.2 specification for camera images with increasing numbers of pixels.

The 120mW active-mode power consumption of the PI2MEQX2503 is more power efficient compared to a ReTimer. In addition, its low-power (5mW), ultra-low-power (2mW), and shutdown (0.2mW) modes of operation offer further power savings, helping to extend battery life. Other features like programmable receiver equalization, output swing, and pre-emphasis compensate for channel loss with low latency over longer-length traces while minimizing power consumption.

For added robustness, the PI2MEQX2503 supports a -40°C to +85°C operating temperature range for industrial applications. This space-saving ReDriver is provided in a very small X1QFN-24 (XEA24) package measuring only 2mm x 4mm.

Key features

  • MIPI D-PHY1.2 Specification Compliant
  • Enables low-cost Cable Solutions
  • Supports 2 lanes at 2.5 Gbps in D-PHY
  • Sub mW Power in shutdown state
  • Supports MIPI DSI Bi-directional LP Mode
  • Supports ULPS and LP Power States
  • Adjustable Output Voltage Swing
  • Selectable TX Pre-emphasis Levels
  • Adjustable Rx EQ to Compensate Insertion Loss
  • Configurable Edge Rate Control
  • Dynamic Data Compensation
  • 2kV ESD HBM Protection
  • Industrial Temperature Range: –40°C to 85°C
  • Available in single 1.8V - supply
  • Totally Lead-Free & Fully RoHS Compliant
  • Halogen and Antimony Free. “Green” Device

Key applications

  • Notebook PC
  • Clamshell
  • Tablets
  • Camera